Captain Kirk - Star Trek - Hueforge 200x200

Captain James T. Kirk - Star Trek - The Original Series

Captain James T. Kirk sits on the bridge of the USS Enterprise, offering his signature, unflinching stare. A small retro tribute to classic science fiction


 The Model is 200x200mm in size

You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm

    #080a0d PLA PolyLite Black  Transmission Distance: 0.3
    #0086d6 PLA BambuLab Basic Cyan  Transmission Distance: 3.5
    #4c5f71 PLA BambuLab Basic Blue Gray  Transmission Distance: 1.8
    #7d6556 PLA BambuLab Dark Brown  Transmission Distance: 0.2
    #c3a738 PLA BambuLab Basic Gold  Transmission Distance: 3
    #e7ceb5 PLA Bambulab Basic Beige  Transmission Distance: 3.2
    #eaffff PLA BambuLab Matte Ivory White  Transmission Distance: 3.4
This print uses 7 unique filaments

Swap Instructions:
    Start with PolyLite Black
    At layer #8 (0.72mm) swap to BambuLab Basic Cyan
    At layer #9 (0.8mm) swap to BambuLab Basic Blue Gray
    At layer #11 (0.96mm) swap to BambuLab Dark Brown
    At layer #12 (1.04mm) swap to BambuLab Basic Gold
    At layer #14 (1.2mm) swap to Bambulab Basic Beige
    At layer #17 (1.44mm) swap to BambuLab Matte Ivory White for the rest.