Fully 3D printable capsule dispenser, assembly ready straight from the print bed. No screw, no mess, maximum fun.  |  2026 Smart Design Global Shortlisted Design

Your Very Own Surprise Dispenser | BONBON

Pipin.World - 皮皮世界

cover

APC_0342-hdr.jpg

Bonbon Standard 2.7 Inch Capsule (Launch Edition)  BCS.1

plate_1.png

c2565a6a0d297278.jpg

Printing Tips*&nbsp;Make sure printer is calibrated and print bed cleaned to avoid failures.

BONBON official 2.7 inch capsules | BCS.1

3x Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Fast Shell (0% Infill, 4 Walls)

4x Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Fast Shell (0% Infill, 4 Walls) – Full Plate

plate_2.png

9x TOP ONLY - Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Bambu A1 – 3x Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Bambu A1 – 3x Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Bambu A1 – Fast Shell (0% Infill, 4 Wall

plate_3.png

9x TOP ONLY - Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Bambu A1 – 3x Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Bambu A1 – 3x Bonbon Standard 2.7in Capsule (Launch Edition)  BCS.1 - Bambu – Fast Shell (0% Infill, 4 Wall

plate_4.png

overtired2

21556302-b0a0-4e71-b812-9c13487ac5f6.jpg

BambuStudio_prepare.png

BambuStudio_Slicingpng.png

BambuStudio_Slicing-x1c-pteg-hfpng.png

b50b84c9-c8bd-46b2-8f4e-d3e6d4194c13.jpg

“Fast Capsule” Baseline Profile Summary: <ul><li>Layer height: 0.28</li><li>Walls: 4</li><li>Infill: 0%</li><li>Top/Bottom: 2 layers, Concentric</li><li>Seam: Aligned</li><li>Speed profile: Standard</li><li>Bed: 50–55 °C (Check your plate, and filament settings, I am using lower bed temp for BIQU Cryogrip plates)</li><li>ii</li></ul>This setup is commonly 30–45% faster than a default 0.2 / 15% infill print on small spherical parts—without any risky tuning. Usinging the ERYONE glow pla there was a little thin on 1 / 2 pieces, but this is also not my most reliable printer, testing with other models + filament, although 100% functional profile on my A1 confirmed. I had a H2D specific profile for the same, going to update any tuning and will post that version as well - you can fit a lot more capsuls per plate, think I was able to get on &nbsp;Multiple plates for a set of 3 or 4 full capsules and 2 separate plates for full plates of the top half and bottom half on 256mm build plates for A1/X1C.&nbsp;A1 print time with ERYONE Pla Glow using hardened .4mm time for 3x full capsules using profile settings 2hr 15ms. Direct feed skipping AMS due to potential glow abrasiveness but thought glow white would give the capsules a nice glow in the right light conditions! &nbsp;

0.28mm layer, 4 walls, 0% infill - Full Plates - 256mm 

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<h2 style="text-align: center">Official BONBON 2.7 inch capsules.</h2><h4 style="text-align: center">simply print with default setting and pinch, twist support off to create your own. light weight yet strong capsules. </h4>

BONBON Official 2.7inch Capsules | BCS 1.0

ASIA

Print Profile(2)

Description

Official BONBON 2.7 inch capsules.

simply print with default setting and pinch, twist support off to create your own. light weight yet strong capsules.

Comment & Rating (64)

License

Related Models