HERO HAMMER TERRAIN

GARA'S LAB

I'm a dad to two beautiful girls and I enjoy introducing them to the multiverse through 3D printed nerd objects.

This is one of the models from my small 3D printing lab.
I enjoy designing, testing, and sharing these figures with those who love printing, painting, and collecting miniatures.

I am a big fan of Bambu Lab and all my prints are made primarily with P2S and A1 mini.

Before publishing a model, I always do several test prints to check stability, supports, and overall output.

------------------------------------------------

PRINT PARAMETERS USED FOR TESTS

Test scale: approximately 8 cm

PLA Basic white
Layer height: 0.16 extra fine
Supports: hybrid tree
Outer brim: 10 mm
Object spacing: 0 mm

------------------------------------------------

SUPPORT REMOVAL

The supports are designed to be quite delicate.

They can be removed without damaging the model, but calmly:
one by one, slowly, using tweezers and a bit of patience.

There's no need to go Rambo on the supports...
otherwise, something might break, and you'll end up crying in front of the printer.

------------------------------------------------

TECHNICAL NOTES (the truth, not poetry)

I prefer to print the figures in single color and paint them after priming, using acrylic markers or miniature painting techniques.

The colored images on the cover are only examples of coloring generated with AI to show possible painting styles.

The final result always depends on the personal taste of the one who paints the model, I apologize for some imperfections and slight differences between the real model and the AI model, I still need to perfect the method!!!!in all cases, you have my photos, both with and without supports, as a reference for the printed model!!!

The design originated from an AI generation (Tripo), subsequently refined manually and tested in FDM printing to ensure real printability.

The actual photos of the print are the monochrome white or gray ones in the gallery.

------------------------------------------------

THE PART THAT DECIDES IF YOU PRINT OR SWEAR

Bed adhesion.

I use CryoGrip Pro Frostbite, and the adhesion is so strong that the prints seem to have taken out a mortgage on the print bed: they never detach.

I mainly use Bambu filaments and have no problems.

If you use a different setup:

• focus first on bed adhesion
• use dry and quality filament
• keep the print bed perfectly clean
• don't be afraid to use more brim or supports

With these precautions, printing becomes much simpler and more reliable.

------------------------------------------------

GARA'S COLLECTION

If you like this model, you can find all the other figures in the collection here:

https://makerworld.com/en/@Gara/upload

But be careful…

if you start printing them, you'll end up wanting them all.

If you like the model, leave a like, it really helps the project grow a lot.