LV Foldable Phone Stand

LV Phone Stand

Compared to the previous non-foldable and relatively heavy printed model, I have optimized this model.

1. Optimized the phone stand structure, Print in Place, no assembly required, ready to use after printing. The foldable structure is easy to carry. Additionally, it's worth noting that there might be slight adhesion after successful printing; just carefully rotate the stand, or push from the top back of the Logo.

2. Optimized the model size. The overall dimensions of this phone stand are 70*120*8mm. The picture shows it being used with an iPhone 13, for your reference; Also, the weight has been reduced, requiring less than 40g of filament for printing, two color changes, and a print time of approximately 1 hour and 20 minutes;

3. The rotating shaft part, being a moving component, may experience wear and tear, breakage, etc. Therefore, the infill density of the rotating shaft part is 100% to extend its service life;

4. The phone angle can be adjusted from multiple angles, currently supporting 6 angle adjustments.

5. Due to different filament sinkage rates, there might be issues with smooth rotation. If so, please send a private message or leave a comment. Thank you for your support.

6. The previous LV phone stand was relatively more stable, and each has its own advantages compared to this one. You are welcome to download and printLV Phone Stand (Print in Place) - Free 3D Print Model - MakerWorld.

7. As this model features another brand's logo, commercial use is prohibited.