Cute black and white Devon Rex cat car decal and keychain|requires AMS printing|10g filament

Inspired by my cat at home, I designed a Q-version Devon Rex image based on my cat's appearance. Two models of different sizes were designed: one without a keychain ring, to be used as a car decal on car windows, and one with a keychain ring that can be used as a keychain, hung on bags or keychains. Because I felt the keychain generator's results were not ideal, I drew it myself in the software. The dimensions are 3mm thick, the keychain is 7cm long, and the car decal is 16cm long. It can be scaled as needed and requires AMS multi-color printing with the surface ironing function enabled. The car decal takes 1.5 hours to print, and the keychain takes 40 minutes to print. The car decal requires 30g filament and 15 filament changes, while the keychain requires 10g filament and 12 filament changes. Bambu Lab's latest firmware should support multi-color printing with manual filament changes from an external spool. Those who don't mind the hassle can manually change the filament. If you don't want too many filament changes, you can simply change the colors to black and white in the software, which can significantly reduce the number of filament changes and printing time. It is recommended to enable surface ironing. If turned off, it can also significantly shorten the printing time. You can adjust the parameters as needed