Natures Moon

cover

Chopper6.jpeg

Chopcolor1.png

Chopcolor2.png

Chopcolor3.png

Chopcolor4.png

Chopcolor5.png

Chopper1.jpeg

Chopper2.jpeg

Chopper3.jpeg

Chopper4.jpeg

Chopper5.jpeg

Chopper7.jpeg

makerlab

plate_1.png

38fd241d25b53b77.jpeg

Chopper8.jpeg

<p>### Print Success Guide To achieve the museum-quality look shown in the photos, follow these slicer recommendations: * **Resolution is Key:** Use a finer layer height (**0.12mm to 0.16mm**) to properly capture the delicate wood grain on the logs and the clothing folds on the figure. * **Smart Supports:** The model requires an incredibly small amount of support (0.55g). Enable **Tree/Organic Supports** with a slight XY separation gap to gently support the axe handle and the lumberjack&#39;s elbows. They will snap right off. * **Material Selection:** Use a **Matte PLA** (like the grey shown in the pictures). Matte finishes naturally hide layer lines and make organic textures like stone, dirt, and wood pop. * **Infill:** 10% to 15% Gyroid infill is more than enough. The log stack is dense and doesn&#39;t require high structural infill. * **Cooling:** Ensure your part cooling fan is at 100% to keep the rounded tops of the logs and the overhangs on the figure crisp. Recommended Printer Settings Based on the images provided, here are some optimized settings for printing this model on a Bambu A1 3D printer to achieve the best quality: ### **Layer Height** * **0.12mm or 0.08mm High Quality:** Since this is a detailed miniature/diorama piece with texture on the logs and fine details on the figure, a smaller layer height will significantly improve the surface finish and capture the finer details better than a standard 0.2mm profile. ### **Infill** * **10-15% Gyroid or Cubic:** This model doesn&#39;t need to bear any load, so a high infill density isn&#39;t necessary. Gyroid or Cubic provides good overall strength without using excessive filament. ### **Supports** * **Tree Supports (Auto):** Looking at the figure chopping wood, the axe, arms, and potentially parts of the figure&#39;s overhangs will need support. Tree supports (often called &#34;organic&#34; supports in some slicers, but &#34;Tree&#34; in Bambu Studio) are ideal here because they minimize contact points on the model, making removal easier and leaving a cleaner surface finish, especially on delicate parts like the axe handle. * **Threshold Angle:** Default is usually fine, but you might want to lower it slightly (e.g., to 25-30 degrees) to ensure the underside of the axe and the figure&#39;s arms are adequately supported. ### **Walls/Perimeters** * **2-3 Wall Loops:** 2 loops are generally sufficient for display models. Increasing to 3 might improve the definition of smaller vertical details. ### **Seams** * **Seam Position:** &#34;Aligned&#34; or &#34;Back&#34;. Given the organic shape of the logs and the figure, &#34;Random&#34; might leave tiny zits all over. &#34;Aligned&#34; usually hides them better in corners or less visible areas. ### **Speed** * **Outer Wall Speed:** Slowing down the outer wall speed slightly (e.g., to 50-100 mm/s depending on your filament) can improve the surface quality and dimensional accuracy of the intricate details.</p>

0.2mm layer, 2 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<p>Bring the rugged outdoors to your desk or tabletop with this highly detailed **Lumberjack Diorama**! Featuring a dynamic woodcutter mid-swing, a textured chopping stump, and a meticulously stacked pile of logs with realistic wood grain, this miniature scene tells a story in every layer. Whether you are looking for immersive tabletop RPG terrain, detailed model railway scenery, or a relaxing weekend painting canvas, this model delivers. **Key Features:** * **Dynamic Pose:** Captures the kinetic energy right before the axe splits the wood. * **Rich Textures:** Deep, printable wood grain on the logs and realistic ground terrain perfect for dry-brushing. * **Economical &amp; Fast:** Uses under 50g of filament and prints in roughly 2 hours. * **Virtually Support-Free:** Intelligently designed to require less than 1 gram of support material, saving you post-processing time.</p>

Logs for firewood - Rustic Lumberjack Diorama

ASIA

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models