Print Profile(1)
Description
đ Description
Natural looking rock cave for shrimp and small fish.
- Top Hole: Lets air escape easily so it sinks effortlessly.
- Bottom Hole: Helps with water flow and easy substrate placement.
đĄ Recommended Print Settings:
- Walls: 3 or 4
- Infill: 15%
- Support: Tree supports (Set Top Z Distance to 0.28 mm for easy removal).
- Bed Adhesion: Use Outer Brim and turn off the fan for the first 3-5 layers to keep supports stable.
Rinse in warm water before putting it in your tank!
NOTE:
If the print floats due to air trapped in the 15% infill, simply submerge it and tilt it underwater to let the air escape through the top vent. Alternatively, you can print it with 100% infill to make it naturally heavy, or use 0% infill and no top/bottom layers so water fills the inside completely.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)