Wizard of Oz HueForge
Print Profile(1)
Description
Wizard of Oz Hueforge print! :D
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
You can change the X and Y axis to be as large as you want. You must leave the Z axis
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#003b3b PLA BambuLab Basic Green Transmission Distance: 2
#3f8e43 PLA BambuLab Basic Mistletoe Green Transmission Distance: 1
#fce300 PLA BambuLab Basic Yellow Transmission Distance: 6
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
This print uses 5 unique filaments
Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Green
At layer #13 (1.12mm) swap to Mistletoe Green
At layer #17 (1.44mm) swap to Yellow
Border Only Colors from here until the end.
At layer #27 (2.24mm) swap to Black for the rest.
Boost Me (for free)
I want to buy a H2C. Boost me so I can fulfill my dream of owning a printer that I dont in any way, shape or form need. :)
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)