Miniature lamp with magnetic activation
Print Profile(4)
Bill of Materials
Description
LED purchase link on Aliexpress: https://a.aliexpress.com/_Ex04tP8
Update: I have created a new ceiling lamp to match the previous one, with a diameter of 35 mm and it works with the same system as the previous one. You have to print the diffuser in vase mode as in the previous model and use double-sided tape to stick it to the ceiling of your dollhouse.
Add a touch of realism and warmth to your dollhouses or dioramas with this Mini LED Lamp. Meticulously designed, it combines an elegant aesthetic finish with an "invisible" magnetic activation system.
✨ Main Features
• Realistic Scale: Perfect dimensions of 45 mm height and 25 mm diameter, ideal for standard dollhouses.
• Magical Activation: Forget about unsightly switches. The lamp is activated simply by bringing a magnet close to the base.
• Detailed Design: Base with sun engraving and texture optimized for Matte filaments (PLA Matte).
• Fast Printing: No need for supports, designed for clean and easy printing.
🛠️ Technical Specifications
• Recommended material: * Base: PLA Matte (earth tones, wood, or pastel colors).
• Lampshade: White PLA for soft light diffusion.
• Required electronics:
• 1x 3V LED with magnetic control (White or warm) 18 mm in diameter and 6.5 mm high.
https://eu.store.bambulab.com/products/y-shape-led-light-with-magnetic-control-switch?id=49273025560924
📦 Assembly Instructions
1. Printing: Use a layer height of 0.12mm to properly capture the sun detail on the base and manually add fuzzy skin to the base in the slicer to keep the engraved icon on the base visible.
2. Electronics: Insert the LED into the top of the base, orienting the magnetic sensor towards the side that is engraved with the sun logo of the base.
3. Closure: Cut the two tabs to separate the base from the white lampshade and press it onto the lamp's base, no glue is required if your printer is well calibrated.
4. Enjoy!: Place a small magnet in your doll's hand or under the table to turn on the light when you bring it close.
5. To turn the lamp on and off, bring the magnet close to the lampshade on the side marked with the sun logo, and it will light up. Bring it close again to switch between the different light modes and turn it off (as shown in the GIF).
If you like this model, please give it a ❤️ and share your print in the "Makes" section. I would love to see how it illuminates your miniatures!
Designed for the Maker community that loves details.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Update: I have created a new ceiling lamp to match the previous one, with a diameter of 35 mm and works with the same system as the previous one. You have to print the diffuser in glass mode as in the previous model and use double-sided tape to stick to the ceiling of your dollhouse.
Give a touch of realism and warmth to your dollhouses or dioramas with this Mini LED Lamp. Meticulously designed, it combines an elegant aesthetic finish with an "invisible" ignition system by magnet.
✨ Main Features
• Realistic Scale: Perfect dimensions of 45 mm high and 25 mm in diameter, ideal for standard dollhouses.
• Magic Activation: Forget about unsightly switches. The lamp is activated simply by bringing a magnet to the base.
• Detailed Design: Base with sun engraving and texture optimized for Matte filaments (PLA Matte).
• Fast Printing: No need for supports, designed for clean and easy printing.
🛠️ Technical Specifications
• Recommended material: * Base: PLA Matte (earth tones, wood or pastel colors).
• Tulip: White PLA for a soft light diffusion.
• Necessary electronics:
• 1x 3V LED with magnetic control (White or warm) of 18 mm diameter and 6.5 mm high.
Https://eu.store.bambulab.com/products/y-shape-led-light-with-magnetic-control-switch? ID=49273025560924
📦 Assembly Instructions
1. Print: Use a layer height of 0.12mm to capture the detail of the sun on the base well and add diffuse skin to the base manually on the laminator to keep the icon engraved on the base visible.
2. Electronics: Insert the LED at the top of the base by orienting the magnetic sensor to the side that is engraved with the logo of the sun of the base.
3. Closure: Cut the two tabs to separate the base of the white tulip and press on the base of the lamp, it does not require glue if your printer is well calibrated.
4. Enjoy!: Place a small magnet on your wrist's hand or under the table to turn on the light when you approach it.
5. To turn on and off the lamp, bring the magnet to the tulip on the side that is marked with the logo of the sun and it will light up, zoom in again to change between the different light modes and turn off (As shown in the GIF).
If you like this model, please give it a ❤️ and share your impression in the "Makes" section. I would love to see how it illuminates your miniatures!
Designed for the detail-loved Maker community.
Boost Me (for free)
If you are interested in any other magnetic activated lamp model, let me know in the comments and we will try to design it
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (12)