Grenadier 102 (mini electric version of Shahed 136) model aircraft
Print Profile(1)
Description
Referring to the scaled-down design of the currently popular Iranian Shahed 136 drone, it does not use the original symmetrical airfoil. The CJ6 airfoil was used to provide better low-speed performance, and wingtip fence structures were added. The fuselage was also changed to a hexagonal shape, which is more suitable for equipment layout and looks cooler, and is equipped with a prominent grip structure for easy hand-launching. Considering the different filaments used by players to prevent trimming problems, I made the nose infinitely extendable in sections, as shown by the black part of the fuselage in the image.
The center of gravity is at the circular mark under the wing. For assembly, refer to the <<Assembly Reference.3mf>> in all files.
Reference electronic equipment
Motor 2812 900KV(6S) /1000kv(4S)
Battery 6S or 4S, approximately 200g—500g
Servos PTK 7465, two units
Maximum compatibility with 10-inch propellers
Four-channel remote control receiver equipment, or 30.5 hole size or SpeedyBee F405Wing flight controller. GPS supports 280-size antenna.
Carbon tube: one 10✖️450 round tube
one 6✖️1000 round tube
two 3✖️380 (control surface shafts)
Screws: a large quantity of M2x10 self-tapping screws
around ten M2x4 heat set nuts
a large quantity of M2 screws
a large quantity of M3 screws
around ten M3 heat set nuts
It is recommended to use Bing ABSASA filament. The empty aircraft's finished weight is between 1.3 and 1.6 kg.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (42)