cover

image.jpg

IMG_20260117_091114.jpg

IMG_20260117_091120.jpg

IMG_20260117_091141.jpg

plate_1.png

926d621fb901636b.jpg

Support is needed for overhanging parts if printed flat, not upright Tree support at 15% with a 45-degree angle if printed flat, not upright Z offset at 0.3 mm for easy removal support Layer height at 0.08 mm for fine details with a 0.2 mm nozzle Gyroid pattern as infill at 15% Print speed of the outer wall at 150 mm/s and inner wall at 200 mm/s Seam position set to ‘nearest’ for a smoother surface Print time is 90 minutes with the original file size and print settings

0.2mm nozzle, 0.08mm layer, 4 walls, 15% infill

The model is inspired by the trending series trailer of Harry Potter. The design is his proper wand

Harry Potter Wand

ASIA

Print Profile(1)

Description

Comment & Rating (3)

License

Related Models