T shirt print goku

✨ Designed for simple and reliable printing
🖨️ Clean and consistent results

🚀 Explore my profile for more exclusive designs
📌 New models coming regularly!

💙 You can also give this model a Boost to support designers—it really helps!
❤️ Thanks for your support!

👕 Textile Customization with TPU: Create Your Own Style! 🚀

Give a three-dimensional touch to your favorite garments. This design is optimized for printing in flexible TPU and transferring directly onto fabric using heat. Technology and fashion in one piece! 🎨✨

Step-by-Step Application Guide 🛠️📖

1. Preparation in the Slicer: Download the file and configure it in Bambu Studio. A thin layer height is recommended so that the logo integrates better with the fabric. 💻📐
2. Delicate Extraction: Once printing is finished, carefully remove the logo from the plate. ⚠️ Note: Being a piece of only 0.3 mm, it is very sensitive; avoid sudden pulls to prevent deformation.
3. Set the Heat: Prepare your ironing station and heat the iron to medium/high temperature (without steam). 🔥💨
4. Positioning: Place your shirt on a flat surface, position the TPU design where you prefer, and definitely cover it with baking paper (wax paper/parchment paper). 📄📍
5. Transfer: Press firmly with the iron over the paper for 15 to 20 seconds. Make sure to apply even heat to all edges of the logo. ⏱️🌡️
6. Final Fixing: Carefully remove the paper once it has cooled slightly. ✅ (Pro tip: Turn the garment inside out and iron the reverse side for another 10 seconds to ensure maximum adhesion). 👕✨

Garment Care 🧼⚠️

For your design to last a long time, follow these tips:

• Always wash below 50°C.
• Do not tumble dry at extreme temperatures, as the TPU could soften and detach.

🛠️ Design created by: poptico_3d

If you liked this model and find it useful for your projects, your support is essential! 🚀 Give me a "Boost" to continue sharing innovative designs with the community. Upload a photo of your personalized shirt in the comments! 📸🙌