Bambu X1-P1 Scoopy Sill - front door sill
Print Profile(1)
Description
A requested adaptation of my X1/P1 Lead Screw Guards to be just a lower door sill to make scooping detritus out of the bottom of the printer easier.
It's a very convenient sub-40 gram, sub-2 hour print. Just scoop the stuff that accumulates in the bottom of the machine out the door.
MATERIAL RECOMMENDATIONS
- PLA: for test fitting only - it should fit X1 / X1C / P1P & P1S machines just fine.
- PETG: should be fine for most peoples day-to-day use. It's flexibility will work nicely with the flex-lip that seats the sill against the floor so well.
- ABS / ASA: would only really be needed if you've fitted an active heater to your chamber.
- Fibre filaments: I'd avoid. The design leverages flexibility for sealing and the smoother the better.
A few suggestions for filaments are in the BoM. As always you're free to print with materials as you see fit.
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)