Print Profile(3)
Description
The inner pots serve for easier planting, watering, and separating the plants. The raised bed section of the cabinet has a size of 95x45x24.5 cm.
The middle pot is 45x45x24 cm and consists of 4 parts. These are held together by M4x12mm pan head screws (amazon.de/Linsenkopfschrauben). I recommend using a ball-end hex key for assembly. Attaching the protective caps requires a bit of force. This is deliberately so that they do not accidentally fall off and you do not injure yourself on the screw tips when digging or planting.
The four corner pots have a size of 22.5 x 24.75 x 24 and are asymmetrical. There are therefore 2 "sizes". One for Front Right and Back Left, and one for Front Left and Back Right. Therefore, 2 of each are needed. For easier removal, the corner pots have integrated handles that are held by pins.
For better drainage, there is also a suitable filter sieve/filter mat for the pots
I printed them in PETG. But I'm not sure if it's the suitable material for the garden. More heat-resistant materials like ABS or ASA would certainly be better. However, I have no experience with these, as I mainly work with PETG and PLA.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)