Marco
Print Profile(1)
Description
Simple and cute print of the name “MARCO” with the addition of a motorcycle doing a wheelie on the “C" and "O”.
Upon request, I can create the name you want; a request from “CHOLON” whom I thank.
Print Time: approx. 4:40 h
Material Consumed: approx. 80 gr
Material Used: PLA Matte blue and green + PLA Basic white (the double color change was made due to a spool ending).
Supports: Tree supports (standard mode) inserted only where strictly necessary.
Support Removal: medium difficulty, but pay attention, especially to small parts near the motorcycle (the upper wheel discs detach 90%, but as shown in the images, it remains beautiful and appreciable).
Layer Height: 0.20 mm and still presents good detail, especially for the motorcycle.
Infill Density: 15% and for its use and size / geometries it resists easily
Boost Me (for free)
If you like my creations, honor me with a Boost, follow me and ask me what you want!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (7)