DIY Monitor Light Bar V2 – Under 60g
Print Profile(1)
Bill of Materials
Description
🔹 DIY Monitor Light Bar V2 – Under 60g
Upgrade your workspace with the DIY Monitor Light Bar V2, a lightweight and modular 3D-printable mounting system designed to provide clean and effective desk illumination. Weighing under 60 grams, this design uses a counterweight-based mechanism to securely mount the light bar on top of your monitor without the need for adhesives or permanent modifications.
The model includes mounting options for both slim and thick monitors, making it versatile and easy to integrate into any desk setup. Optimized for FDM 3D printing, the parts are simple to print and assemble.
✨ Key Features
- ✅ Ultra-Lightweight – Total printed weight under 60 grams.
- ✅ Counterweight Mount – Stable and secure without damaging the monitor.
- ✅ Supports Slim & Thick Monitors – Two mounting variations included.
- ✅ Modular Design – Easy to print, assemble, and customize.
- ✅ FDM-Friendly – Prints with minimal supports.
- ✅ Clean & Minimal Aesthetic – Perfect for modern desk setups.
📦 Included Parts
- Light Bar Body
- Diffuser
- Mount for Slim Monitors
- Mount for Thick Monitors
🔩 Hardware Requirements
- M3 Screws (3mm diameter) – 4 pieces (recommended length: 8–12 mm).
- LED Strip – Optional, depending on your lighting setup.
- Glue (Optional) – If needed, use a small amount of glue to secure the diffuser in place.
🖨️ Recommended Print Settings
| Setting | Recommendation |
|---|---|
| Layer Height | 0.2 mm |
| Infill | 15–25% |
| Walls | 3 |
| Supports | Only for the mounting bracket (if necessary) |
| Material | PLA or PETG (PETG recommended for durability) |
| Nozzle | 0.4 mm |
🧵 Suggested Materials
| Part | Material | Notes |
|---|---|---|
| Light Bar | PLA / PETG | Matte black recommended |
| Diffuser | White or Translucent PLA | Provides soft light |
| Mount & Bracket | PETG / ABS | For added strength |
| Counterweight | PLA | Can be filled with coins or sand for extra stability |
🛠️ Assembly Instructions
- Print all components: Light Bar, Diffuser, and the appropriate mount (Slim or Thick).
- Insert the LED strip into the light bar housing.
- Attach the diffuser to the bottom of the light bar.
- If the fit is loose, apply a small amount of glue to secure it.
- Assemble the mounting bracket using 4 × M3 screws.
- Add additional weight to the counterweight if necessary (e.g., coins or metal pieces).
- Place the assembly on top of your monitor and adjust the position for optimal lighting.
📏 Compatibility
- ✔️ Slim bezel monitors.
- ✔️ Thick-back monitors.
- ✔️ Ideal for 24"–34" displays (depending on counterweight).
⚠️ Notes
- Ensure the LED strip does not exceed recommended temperatures when using PLA.
- PETG is recommended for better heat resistance.
- Use minimal glue to allow future maintenance if needed.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)