RedMagic

cover

Full_Gif.gif

Print_In_Place_Bearing.png

adjustable_connection.png

plate_1.png

plate_2.png

plate_3.png

cbb80b76ccedda26.png

Print profile made for everything but not the a1 mini

Normal Profile

plate_4.png

plate_5.png

plate_6.png

plate_7.png

plate_8.png

plate_9.png

Main4_3.png

A1 Mini

Capitaine Bob

IMG_7611.JPG

If sanding trace on the inner blade edge don’t bother you: Remove the support excess with a utility knife and sand with a 150 grit paper. Reduces printing time by more than 50%. There is also less waste.

Blades (less printig time and waste)

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

<boostme><boosttitle>Boost Me</boosttitle><boostcontent>Boost for free cookie ❤️</boostcontent></boostme>Looking for a cool simple wind spinner? Look no further.&nbsp;This is a simple wind spinner with two fins. It uses a print in place bearing and everything just slides in place.   <h2>Good to know!</h2>If the bearing is a bit stuck after the print. Wiggle the wheels inside around a bit. This will break the connect to the outside walls.The max pole width that this design is made for is 19mm. Anything lower you can use the side screw to make sure it fits. When printing the fins i have added support. It is possible to print them without this. In my testing (With P2S) this is about 50% fail chance.&nbsp;Hope you all like this design. Any feedback is always welcome ❤️

Simple Dual Wind Spinner | Print in Place

ASIA

Print Profile(3)

Bill of Materials

Description

Good to know!

Comment & Rating (16)

License

Related Models