EviLSeeD

cover

2023-09-28_vdad7yksxgqx.jpg

2023-09-28_jrbimxk1yrhy.jpg

Luxor GG BIF (33mm x 1.5mm)

plate_1.png

Longi LR5-54HTB (30mm x 1.5mm)

plate_2.png

jr2142

IMG_3990_850d0709-ac63-4492-9fcf-3dc029a22314.webp

Plate 1 is the original and Plate 2 has been shrunk to 90.9% on the Y-axis to fit Longi modules which are 30mm instead of 33mm wide. Only suitable to test fit on your solar module printing in ASA.

Luxor/Longi PLA Fit Test

IMG_3997_3d45d54b-4a4b-4664-929c-c8183b24ba45.webp

plate_1.webp

Plate 1 is the original and Plate 2 has been shrunk to 90.9% on the Y-axis to fit Longi modules which are 30mm instead of 33mm wide. &nbsp;This profile has been tuned for adhesion and to reduce warping. Use a glue stick, if you struggle. Was not able to print without on textured PEI plate. On a clean engineering plate I was able to get away without glue. &nbsp;Note: This profile has been tuned for reliability over speed. The cut-out hole causes warping with stock profiles due to increased fan speeds for the overhangs.

Luxor/Longi ASA Maximum Strength

Solar panel cable management clip

Printed @ 0.24mm without supports.The frame on my 420w Luxor GG BIF Black Frame modules is 33mm wide and 1,5mm thick.If you have diffrent dimensions, just add them to the comments and I'll try to upload a modified version for you asap.I've added v2, which has a smaller cutout and is less flexible.&nbsp;Also check out my water drain clip for solar modules:<a target="_blank" href="https://makerworld.com/de/models/26809" rel="nofollow noopener">Capillary solar water drain clip</a>

ASIA

Print Profile(2)

Description

Comment & Rating (12)

This remix is based on

License

Related Models