Corner Shelf With Wire Chase

Upgrade your space with a clean, modern solution for both storage and cable management. This wall-mounted corner shelf is thoughtfully designed to maximize unused corner space while keeping cords neatly out of sight.

There is a slot in the back of the corner piece that allows existing cords to slide in without having to unplug them.  One of the plates has corner piece with a hole just above the top shelf to route a USB cable through it.  This works great for cameras sitting on the top shelf.  Works great for our indoor security camera but would also work for a baby monitor cam.

There are “coupling” pieces that are used to mount the corner piece to the wall and to each other.  I just used standard drywall screws as there should be some type of structure in the corners.  You could use doublesideded tape or velcro tape but the shelves will have a slight gap by the walls.  Still worked great!

There are 2 shelves to choose from.  One is printed flat for ease of printing but will be slightly weaker due to the orientation of the “slat wall” style connection.  Still plenty strong to hold enough.  The second shelf is stronger as it is printed standing on its side and has a brace on the bottom to stiffen it up.  My printer had a slight problem with the honeycomb pattern on my first attempt but it may have been my filament as the second attempt worked perfect. It feels very sturdy but I haven't fully tested its potential… yet.

NOTE: SHELVES MUST BE INSTALLED ON CORNER BRACKET BOFORE ATTACHING TO THE WALL!!!