Daniel007

cover

20260418_172421.jpg

plate_1.png

4808c03f43c047ae.png

Print Profile – Dishwasher Feet (0.2 mm, 4 mm nozzle)<ul><li>Nozzle diameter: 4.0 mm (tjek at din slicer understøtter denne — ofte er det 0.4 mm, så hvis du mente 0.4 mm, juster tallet)</li><li>Layer height: 0.2 mm</li><li>Walls (perimeters): 3</li><li>Infill pattern: Honeycomb</li><li>Infill density: 15%</li><li>Top layers: 4</li><li>Bottom layers: 4</li><li>Print temperature: 200–210 °C (for PLA, justér efter filamenttype)</li><li>Bed temperature: 60 °C</li><li>Supports: Off (valgfrit, afhængigt af modelorientering)</li><li>Adhesion: Brim eller Skirt (1–2 lines)</li></ul>

Print Profile – Dishwasher Feet (0.2 mm, 4 mm nozzle)<ul><li>Nozzle diameter: 4.0 mm (check that your slicer supports this — often it's 0.4 mm, so if you meant 0.4 mm, adjust the number)</li><li>Layer height: 0.2 mm</li><li>Walls (perimeters): 3</li><li>Infill pattern: Honeycomb</li><li>Infill density: 15%</li><li>Top layers: 4</li><li>Bottom layers: 4</li><li>Print temperature: 200–210 °C (for PLA, adjust according to filament type)</li><li>Bed temperature: 60 °C</li><li>Supports: Off (optional, depending on model orientation)</li><li>Adhesion: brim or skirt (1–2 lines)</li></ul>

0.2mm layer, 3 walls, 15% infill

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.

This user content is licensed under a Standard Digital File License.

Dishwasher Height Adjustment Feet (1–5 cm)&nbsp;I designed a set of simple adjustment feet to raise a dishwasher without having to extend the original feet too much. The set includes 5 versions, ranging from 1 cm to 5 cm in height, allowing for flexible height adjustment depending on your setup.These feet are easy to print and install — perfect for fine-tuning your dishwasher’s height for a better fit or easier leveling.

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models