Candle Holder - simple - PETG
Print Profile(1)
Bill of Materials
Description
- simple candle holder / dish made of PETG
- can be scaled as desired
- no support structure
- suitable for small pillar candles
- when printing PETG I turn off the Aux fan and the chamber fan runs at only 20%
- 16mm layer height ... please adjust bed and nozzle temperature to your filament ... printed with Bambu Lab P1S
Disclaimer:
* - some external links contain affiliate data. If you order something through these links, I will receive a small commission to supplement my pension, it will cost you nothing extra.
Thank you very much.
Please note: The quality of the print has a lot to do with very well-dried filament and a very clean print plate. Please check your printing environment and adjust the print bed and nozzle temperature to your filament.
The models shown here are without exception printed with Bambu Lab P1S.
*Filament dryer: https://www.kleinanzeigen.de/s-anzeige/3-fach-filamenttrockner-doerrautomat-neu/3450232254-249-20831
*Container for storing filament spools: https://amzn.to/4eyK6sQ - the filament spools fit in there perfectly
*Silica - granules - https://amzn.to/4fxnWbx - I take 40g per container (4L), if the granules have become dark due to humidity, they are dried in the oven at approx. 70 degrees, they turn orange again and can be reused
*Bambu Lab P1S 3D Printer: https://eu.store.bambulab.com/products/p1s?from=navigation
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)