Aircraft Carrier Fujian 53cm long

Boost Me (for free)

Print tests completed for three build plate sizes, no supports needed for Fujian aircraft carrier, mortise and tenon assembly

I tested three build plate sizes, and assembly was not a problem, but I do not have an A series machine, so actual printing conditions are unknown

All files require no supports for printing, and if printing in a single color, the speed will be very fast

The colors used are: Bambu Lab's blue-gray, white, gray, red, black, yellow

Please ensure the build plate is clean, spraying glue is recommended

 

Superstructure
A1-X2D, H2, A1 mini: plate A

Bow, Beam, Keel
A1-X2D, H2: plate C; A1 mini: plates C, D
Note: The A1 mini's keel requires connector pieces for assembly

Bow, left and right symmetrical
A1-X2D, H2, A1 mini: plate B

Hull sides (left and right symmetrical)

A1-X2D, H2: plate E; A1 mini: plates G, H, I, J
Note: If the A1 mini prints poorly, you can split it into objects, print two parts, and then connect them using H-shaped connectors (verified as feasible)

Stern
A1-X2D, H2: plate D; A1 mini: plates E, F

Hull bottom
A1-X2D, H2: plate F; A1 mini: plates K, L

Left and right weapon platforms
A1-X2D: plates G, H, I; H2: plate G; A1 mini: plates M to R

Deck
Trust the national selection, blue-gray is currently the best main deck color!!

Jet blast deflector