Playing Cards Case
Print Profile(1)
Description
A compact two-part sliding case for standard trading card decks, in a two-color variant for printers with AMS or a multi-material system. It accommodates cards up to 66 × 91 mm and has an outer footprint of 69 × 93 × 20 mm.
PRINT SETTINGS
All print settings are embedded in the .3mf file. Beginners should leave all slicer settings at their defaults. Assign filament slots to each part in the slicer's color assignment panel before slicing. The model requires no supports.
TIPS
Printing with AMS: I integrated colors in the 3mf project so if you want to get my result, consider using AMS or manually change colors
Card count: the case is sized for a standard deck (54 cards with Joker); overfilling will make the lid difficult to close.
Fit tolerance: if the lid is too loose, try printing at 99–100% scale; if too tight, increase slightly or sand the rails.
⚠️ If you encounter any issues while printing, feel free to contact me via the comment section or by sending me a message. I will do my best to resolve the issue and, if needed, make changes to the model; your feedback helps me a lot.
Boost Me (for free)
Quick reminder, if you've downloaded or printed any of my models and liked them, you can support me for free by gifting a boost. It takes 5 seconds and helps a ton <3
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (2)