Packaging for Jenga Game
Print Profile(2)
Description
Most Jenga games come in cardboard packaging, which, from experience, usually breaks or looks tattered after frequent use. This model offers an alternative for exactly this case. The familiar thin wobbly plastic part used to align the tower is supplemented by a more stable, printed part.
To use the packaging as simply and straightforwardly as possible, I recommend following the instructions below. The number in parentheses after each step indicates the image number (see above) that illustrates it.
- Build the tower almost upside down on the “alignment aid.” (3)
- Then place the unlabeled part of the packaging onto the tower. (4) The tower should then look like this. (5)
- Turn the tower over. (6) The result of this step can be seen in (7).
- Place the labeled part of the packaging onto the tower. (8)
- FINISHED (9)
I do not assume any liability for material or personal damage caused when downloading, handling, modifying, slicing, printing, and/or using the file, the print profile, and/or the model. The same applies to the printed model(s).
By performing any of the actions just mentioned, you agree to this.
License
Comment & Rating (0)