Angled Foregrip with Index Finger Rest (Picatinny)
Print Profile(4)
Bill of Materials
- Socket Bolt x 4: Either 3x 16mm 1x 12mm or 4x 12mm
Description
A functional angled foregrip designed to mount on standard Picatinny rails of an Airsoft replica. Unlike standard angled grips that only feature a flat angled face, this model includes a dedicated index finger rest to provide a more secure and repeatable hold.
The design consists of two halves that clamp directly around the rail. This allows for straightforward installation and removal without fragile parts or additional hardware.
To assemble the grip, you will need 4x M4 socket head bolts. You can use either of the following configurations:
3x 16mm bolts and 1x 12mm bolt
4x 12mm bolts
The bolts tap directly into the other half so no additional nuts are needed
Printing Recommendations:
- Material: PLA CF, PETG (CF), or ABS/ASA for adequate durability.
- Walls/Perimeters: 3 to 4 walls for structural strength around the bolt holes.
- Infill: 25% or higher (Gyroid or Cubic recommended).
- Orientation: Print the halves flat on their mating surfaces to minimize the need for supports and maximize layer adhesion strength along the clamping axis.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (16)