X2D Poop Bin Waste Box Trash Can P2S Poop Bin Compatible External Exhaust Quick-Release Installation
Print Profile(4)
Description
The X2D poop chute is finally designed. The delay was due to the difficulty and challenge of this model, and the desire to achieve perfection in one go. It is finally completed today, with the following advantages:
- Compatible with external exhaust fans
- Supports quick release, split design, convenient for waste disposal
- Waste container supports blind insertion
- Uses original machine screws
- Compatible with P2S devices
- Reserves 8mm magnet holes to enhance seating sensation, can be ignored if no magnets are used
- Triangular texture aesthetic on the back, also available in a hollow version
Boost Me (for free)
If you like it, thanks for boosting and supporting
Special Notes:
- The original machine screws are relatively short, and the plastic holes have poor strength. Pay close attention when installing the slide rail
Do not overtighten screws
Do not overtighten screws
Do not overtighten screws
Important things are said three times. If you accidentally strip the screw, you can replace it with a longer one, it will not affect anything. The internal wiring is far from this area
2. The 8mm magnet inside the waste container is to enhance the seating sensation and make the waste container fit more snugly, but in practice, the waste container has gravity, so not installing magnets has no effect at all
3. Considering that in most cases there are many other objects around the 3D Printer, and the waste container is at the back, making it impossible to see during installation, the tolerance has been deliberately widened. Verified through multiple trials, blind insertion is perfectly achievable, resulting in a better experience
4. 2026.04.23 Update: Added a plug. Previously, there was a small hole on the right side after installation, which was not ideal for the sealed version. An additional part was added for those with OCD, which can be ignored if not needed
Boost Me (for free)
If you like it, thanks for boosting and supporting
Everyone is welcome to actively print and share photos, give a triple like, boost, and support. If you have any questions, feel free to leave comments and feedback
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (6)