GRUV SCRAPER // Made for Bambu Lab blade kits

Repurpose your blade, screws and magnet from Bambu. This scraper aligns to the bed with the magnet and ensures the perfect scraping angle. Let the tool do the work!

To use this scraper: simply place it on the print plate, the inserted magnet will align the scraper flat to the metal build surface. Now push the scraper behind the plastic to be removed and let the blade bring the plastic to you. The front surface of the scraper is curved to direct the scraped plastic upwards toward your fingers, so once you have the purge line in the back right scraped up about and inch, you can press the plastic to the scraper and remove the whole line. Give it a shot and enjoy!

*Please note that it has been indicated that the screws, magnet and blade from Bambu Lab may have minor changes in production tolerance in between production batches, so there are cases when holes may be slightly off or not deep enough for longer screws. There are also some great Remixes too with Bambu Lab logo and alternative magnet options.

WARNING - This blade is sharp and the assembly of this product should only be done by those who consider themselves professional.