Mario Question Block Style Folding Phone Stand Pro
Print Profile(4)
Description
The model requires magnets (D4X2 or D5X2)
After the first version was released, we received a lot of feedback, and specifically upgraded the phone holder
1. Overall size enlarged by 10 percent from 50mm³ to 55mm³
2. The deployment angle adjusted from 70 degrees to 65 degrees (which is already the maximum tilt angle for this structure)
3. Added a lanyard hole, suitable for most lanyards
4. Base weighted to improve stability
5. Added a dual-color version, with the question mark box logo dual-color printed
Boost Me (for free)
Below is the suggested installation guide
1. Remove the shaft from the skirt, and make sure to clean off any burrs
2. Insert the shaft into the mounting hole as shown below and press it flat
3. Install the front and back logos correctly (super glue is needed)
4. Install the magnets (optional), ensure the polarities attract
5. Install the lanyard (optional)
6. Done
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (3)