Wet Cat Food Can Holder Lazy Susan 3oz, 5oz, Gems
Print Profile(2)
Bill of Materials
- 4.5mm BB's x 10: https://a.co/d/0eheheWg
- 608 Bearing x 1: https://a.co/d/00cZLkVO
Description
V8 is a complete redesign of my previous version listed below. I recommended you use my 3mf files to get the best quality per performance prints.
https://makerworld.com/en/models/698986
Key Changes:
Sturdier Design that prints at a higher quality at height.
The base attaches and will not come off if you pick it up.
Added BB's for smoother rolling under weight.
Notes:
Uses a 608 bearing. You can 3d print one but due to the weight when fully stacked, I would recommend using a metal one.
Please consider Boosting if you like it! It means a lot!
Purchased Parts:
1 - 608 Bearing: https://a.co/d/0gtwB8pN or Printed: https://makerworld.com/en/models/473167-608z-6000z-6001z-roller-bearing-v2#profileId-383170
10 - 4.5mm BB's: https://a.co/d/0488Gm5O (Costs about $1.50 at Walmart)
Assembly Instructions:
Place BB's on top of the holes on the base. Press in firmly using a screwdriver handle or something similar.
Add 608 Bearing to the top. This will be a tight fit.
Align the base tabs with the top hole and pinch in 2 of the tabs slightly to allow it to slide into the hole.
Buy Me a Coffee…
buymeacoffee.com/3dartbydesign
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (4)