Lion King Chess Set

This design is optimized for high-quality printing.

It was printed with a 0.4 mm nozzle and a layer height of 0.12 mm to achieve defined details and a clean surface.

👉 For optimal results:

• the pieces were printed with 50% infill
• the base at 100% infill, to add more weight and a premium feel to the final product

Inside each plate, you will find specific instructions to easily guide you through printing.

For the colors, I used:

• Bambu Lab black
• for beige, since sand color was not available, I used a generic color

👉 Feel free to customize the colors as you prefer, according to your style or the filament you have available.

I have added the name under each piece, to increase perceived quality and make it easy to recognize which role each element on the chessboard corresponds to.

Of course, for those who do not use the AMS, it is possible to print everything in a single color or freely customize the colors.

All pieces are my original creation, inspired by The Lion King, but reinterpreted with a touch of novelty and authenticity.

I truly hope you enjoy the project!

>>ATTENTION<<

obviously glue is needed to attach the piece to the base!!

‼️ CHESSBOARD ADDITION ♟️

📏 Total dimensions: 320 x 320 mm
📏 Playing area: 280 x 280 mm

In the downloads, you will find a second print profile containing:

• First plate: frames with Fuzzy Skin effect
• Second plate: game board (to be printed 4 times)
• Subsequent plates: base/top to be printed and assembled, on which the frames will then be placed and the game board modules inserted (plate 2 x4).

⚠️ Tip: before definitively gluing the parts, always check measurements and tolerances by performing an assembly test, to avoid any problems or misalignments.