MagClick - The Magnet Powered Clicker
Print Profile(6)
Bill of Materials
Description
MagClick - The Magnet Powered Fidget Clicker
Sharp, Satisfying, Magnetic – A next-level clicker
Magnets:
You will need 20 round 4×2 mm magnets, or 6×3 mm magnets for the XL size. I recommend using magnets from the Bambu Lab store because they are really high quality and work very well for this. If you purchase them through the Bill of Materials, the cost is the same, and you support me in the process.
Make sure to use strong neodymium magnets!
Assembly:
Magnet order:
I recommend using a small amount of superglue when attaching the magnets.
Use the picture below to arrange the magnets correctly. The north and south sides don’t matter, only their orientation relative to each other.
To make assembling easier, press and twist the pins in place at a slight angle like you see in the video!
Boost Me (for free)
Consider leaving a boost to support my hobby :)
Check out my other Fidget Clickers!
PentaClick - The Ultimate Rubber Band Clicker PentaSpin - The Spinning Fidget Clicker
If you want to sell my designs, I offer commercial licenses in https://www.patreon.com/YosaNatural
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (187)