Starscourge Heirloom Talisman – Elden Ring

Starscourge Heirloom Talisman – Elden Ring ✨

A high-detail recreation of the Starscourge Heirloom talisman from Elden Ring, designed as a display piece, collectible prop, or wearable talisman.

This model is inspired by the in-game talisman associated with Starscourge Radahn and the proud warriors who followed him. In game, the Starscourge Heirloom raises Strength, making it a recognizable piece for Strength builds, Radahn fans, and Elden Ring collectors.

Designed to capture the engraved face detail, worn metal look, raised surface lines, and aged talisman shape while still printing cleanly on FDM printers.

🔧 Print Notes

✓ Designed for Bambu CoreXY printers
✓ Tree supports recommended for cleaner results
✓ Print orientation is already set in the profile
✓ 0.12mm layer height recommended for best detail
✓ Matte gold, bronze, or aged metallic PLA works great for the talisman look
✓ Slow outer walls can help preserve the face and engraved details
✓ Works great as a display piece, cosplay accessory, or collectible prop

🧼 Before Printing

Please clean your build plate before starting the print. A dirty or oily plate can cause lifting, warping, or poor bed adhesion, especially on detailed prints with smaller contact areas.

Recommended prep:

✓ Wash the plate with dish soap and warm water, then dry fully
✓ Avoid touching the print surface after cleaning
✓ Use glue stick or liquid glue if your plate normally has adhesion issues
✓ Add a brim if you notice edge lifting or instability
✓ Watch the first layer to make sure it is sticking evenly before walking away

📏 Scaling

Scale the model up or down depending on your display, cosplay, or wearable needs.

The model’s dimensions can be adjusted independently in Bambu Studio. Select the model, open Scale, uncheck Uniform scale, and change the X, Y, or Z axis to adjust the width, thickness, or height to your preference.

If scaling the overall model smaller, some of the finer face and engraved surface details may become less visible. For the cleanest result, I recommend keeping the model at the uploaded size or scaling it up slightly.

⚠️ A1 / A1 Mini Note

This profile was tuned on CoreXY machines. It should still print on A1 / A1 Mini, but slowing speeds slightly and using a brim can help with stability.

A dedicated A1 / A1 Mini profile may be added later.

🌑 More Elden Ring Prints

If you like this print, check out my other Elden Ring 3D prints below! 

Elden Ring 3D Prints Collection:

I’ll be adding more Elden Ring talismans, weapons, wall displays, cosplay props, Zelda-inspired prints, anime-related models, and collectible display pieces regularly.

If that sounds like your kind of stuff, a follow would help a ton and you’ll see new models as they go live 🙌

If you print this, I’d love to see how it turns out. Feel free to share your results, painted versions, or display setups