Holder for Micro:Bit

Micro:bit Desk Stand / Holder

Need a simple and secure way to hold your BBC micro:bit while coding or displaying a project? This minimalist desk stand is designed to hold your micro:bit perfectly upright, making it an excellent addition to any maker's desk or classroom.

It features a sleek, low-profile rectangular base with a precision-sized slot that grips the bottom edge of the board. The design ensures your micro:bit stays stable without blocking any of the important features.

Key Features

• Unhindered Access: The slot depth is optimized so the A and B buttons, as well as the 5x5 LED matrix, remain completely visible and accessible.
• Top-Port Friendly: Because the board sits upright, the top USB port, battery connector, and reset button are easy to reach.
• Stable Base: The wide, flat footprint keeps your board from tipping over while connected to cables.
• Clean Design: Features a subtle chamfer on the top edge for a sleek, finished look.

Print Settings & Instructions

This is an extremely easy, beginner-friendly print that requires minimal filament.

• Material: PLA, or PETG (PLA works great for this)
• Layer Height: 0.2mm (Standard)
• Infill: 10% - 15% (Honeycomb or Gyroid infill works well)
• Wall Loops: 2-3
• Supports: No supports required! Print it flat on its base.
• Brim: Not necessary unless you have severe adhesion issues.

Happy Printing!

I hope this stand helps keep your projects organized and on display! If you print one, please share a photo in the Comments section. A rating or boost is always appreciated. Happy making!