Search models, users, collections, and posts
GIF
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
9.4 h
2 plates
Open in Bambu Studio
Boost
2
6
1
0
3
1
Released
Description
Content has been automatically translated.
The main body uses PLA Marble, the window panes are PLA Basic white, the window frames are dark brown PLA, or wood-colored or reddish-brown can be used
Traditional stone lantern style, fully detachable design, all parts are snap-fit installed, with several lower parts requiring glue for installation
Do not glue the top cover
Do not glue the top cover
Do not glue the top cover
As shown in Figure 3, this design uses a Bambu Lab candle light component inside, the switch is at the bottom of the light, so the top cover needs to be removed to take out the light for switching on/off
Note that the main body is not perfectly square, the left and right, front and back distances have slight differences, therefore, if the top cover doesn't fit, try rotating it 90° for installation
Additionally, the exposed white edges on the top and bottom of the window panes are different, the white edge at the bottom is shorter, after alignment, press to snap it into the groove on the inside of the main body, and due to different sinkage rates of materials, a simple adhesive can prevent it from falling off
Applicable components are as follows
License
This user content is licensed under a Standard Digital File License.
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)