Click Spinner | Fully Printed

Looking for the ultimate fidget spinner toy? Don't look further!
 

This is a fun simple fidget toy. On the outside it has a spinner, this works with a print in place bearing. Then in the middle it has a fun click system using a printed spring.

Important Points

• There are some small angles that the clicker doesn't work.
• When print is finished make sure to wiggle the bearing to make sure all the parts are lose.
• You might want to wait a bit for the build plate to cool before taking of the parts.

Assembly

Every part of this is printed. This makes it so there is some simple assembly needed. We will start with the top plate (This is the one with bambu lab logo or two connect points for the sprint). We will grab the spring and align the two connection points with the one on the plate. Then press down and you will hear two snaps. Next grad the bearing, look at the center of sides. You will see that on the sides of the center both sides of the bearing are different. Align the correct shape with the top plate and push down (This might need some force). Final push down the other plate and you are all done.