Magnetic Triple Card Wall Display Frame
Print Profile(2)
Bill of Materials
Description
Showcase three standard trading cards in a clean, angled wall display. Cards slide into toploaders, which fit snugly into the frame slots for a secure hold. The front face attaches magnetically, making it easy to insert or swap cards while keeping everything aligned and protected.
The mount installs to the wall with two screws and anchors, while the frame snaps into place using embedded magnets. The stepped layout creates a dynamic presentation that stands out without taking up much space.
Features
- Holds 3 standard toploader card cases
- Magnetic front face for easy access
- Clean, angled display layout
- Secure wall-mounted base
- Hidden magnet system for alignment
- Minimal hardware visibility
Hardware / Assembly Notes
- 8 pcs. 6x3 mm magnets : https://amzn.to/4cOs5pL
- Affiliate Disclosure: As an Amazon Associate I earn from qualifying purchases.
- Pause required to insert magnets into frame
- After placing frame onto mount, flip and insert remaining magnets with correct polarity
- Mount attaches with 2 drywall screws + anchors
- Ensure magnet polarity is aligned before final seating
Disclaimer
Cards and toploaders are not included. Use at your own risk. While the design is intended to securely hold standard toploaders, slight variations in print settings, materials, or tolerances may affect fit. Magnets must be properly seated and secured; loose magnets can shift or fall out over time.
Small magnets can be hazardous if swallowed. Keep away from children and pets. Always ensure magnets are fully embedded and consider using adhesive for a more permanent hold.
Avoid placing valuable or irreplaceable cards in high-traffic areas or where the mount could be bumped or fall. The creator is not responsible for any damage to cards, cases, magnets, or mounting surfaces.
Membership
Want to sell physical prints of my designs? This membership covers commercial use and will continue to grow as I add more models. Thanks!
Boost Me (for free)
If you like this model, a boost helps support future designs and free uploads. Thanks for the support!
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (12)