Print Profile(3)
Description
Boost Me (for free)
This took me hundreds of hours please leave a make and a comment, Id love to see this in your "space"!
click the dropdown and select "download stl" it'll show a list of tiles for you to download!
**With the frames linked below you can mount this in either portrait or landscape depending on your space**
-Print all tiles at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
-You may print at higher layer heights below the Base Thickness of 0.48mm
-The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.24mm
-This print uses 4 unique filaments
-Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Space Grey ( ;] ) or Dark Grey
At layer #13 (1.12mm) swap to Light Grey
At layer #20 (1.68mm) swap to White for the rest.
-Each Tile is it's own 3mf file with the correct Row and Column in the name.
-The GridLayout.png below shows each section and it's size in mm to help visualize.
*It is important to note that some tiles will not have white and will not have a layers above #19/20, this is normal.
*Tiles with pure black will be a little thin so take care when removing from your build plate.
License
Comment & Rating (150)