Flamengo Can Holder - Handle and Libertadores Patch

Flamengo Can/Long Neck/600ML Bottle Holder With Handle and Libertadores Patch

I present to you this bottle and can holder developed especially for Flamengo fans, this time with a handle and Libertadores champion patch, compatible with:

• Long neck beer bottles

• 600ml bottles

• Compatible with all 473ml cans (Heineken, Monster Energy, Red Bull)

• Compatible with all fat 350ml cans

• Compatible with all 500ml European cans (Heineken, Monster Energy, Red Bull)

The 500ml model is for Monster cans from Europe, for cans from Brazil, print the 473ml model

🎨 Premium Design

The model was designed to bring a striking, elegant, and identity-filled look:

• Upper band:
“Clube de Regatas do Flamengo”

• Lower bands:
“No one Dies Owing Us”
“Race, Love, and Passion”

• Model body:
Flamengo (CRF) symbol in low relief, creating a premium finish

• Additional applicable element:
Flamengo symbol on the front of the cup

Libertadores de América patch on the back of the cup

🔧 Symbol Assembly

To apply the symbol to the cup shape:

1. Heat the build plate to 80°C
2. Leave the symbol on top for 1 to 2 minutes
3. It will slightly soften
4. Mold it onto the can holder body, wait for it to cool, and glue it

🖨️ Print Settings

• Nozzle: 0.4

• Layer Height: 0.16 (if your can or long neck holder comes out very marked, with visible layer lines, reduce the outer wall speed and activate the prime tower for a better finish, but the model in the photo was printed without a prime tower)

⚙️ Structure and Resistance

• 2 walls
• Infill: 10% Gyroid

✔ Light, resistant, and functional model

If you want more resistance, increase to 3 walls and 15% Gyroid infill, but this way it works very well

🔗 See my other projects

Check out other available models, click on the photo to access:

🚀 Support the project

If this model helped you:

• Leave a like ❤️
• Comment with your print
• And if you can, send a BOOST 🚀

👉 This helps me a lot to continue creating free models for the community