30° Banked Curve Pack - 1:64 Diecast compatible

90 and 45 -degree curve pack with a 30-degree tilt angle, compatible with die cast cars and removable connectors. 

It includes three curves sizes—these curves are designed to have a small gap between them when they are adjacent to each other, so that the car will not hit the outer wall of the previous bend when driving on the banked track surface.

The original size—shown in red—is printable on an A1 Mini—and a separate profile has been uploaded in which the other two bends have been removed.

Large – shown in yellow – cannot be printed on A1 Mini

Extra Large – shown in green – cannot be printed on A1 Mini

NOTE-A1 mini's will need to print 2 45 degree versions of the larger sizes if they want to make a 90.  

All three sizes can be printed on a single printing plate. You are free to print them individually or print any one or more you want!

These curves feature a 30-degree bank and improved sidewalls to prevent high-speed cars from flying off the track. Similar to my non-incline curves, these curves can be connected to form a complete loop if needed. They are durable even when stepped on, although I don't recommend stepping on them.

I designed these bends for a tight fit, so depending on the connector you choose, you may need to push it into place from the bottom. The latest Hot Wheels style connectors are the tightest. They are very robust and won't break even if stepped on; so far, they haven't failed even when intentionally stepped on.

I recommend using a tree-like support with a threshold of 28. This is simply to ensure the connector area is as precise as possible for optimal fit. While results may vary from printer to printer, some minor cleaning may be necessary.