Sinuosity 9 - Abstract wall art

The series of beautiful geometric figures continues (check my profile for other models)

Add natural elegance and depth to your walls with this decorative panel that reproduces abstract plant forms, similar to a modern abstract relief artwork, characterized by fluid lines that create a dynamic and organic effect on the wall. It is a contemporary design piece, ideal for adding an artistic touch to living rooms, offices, or entrances

When hung, they appear to float, creating a 3D effect on a white or light background

Printed in black SUNLU PLA. Printing is very easy and consumes only 24.73 grams of filament (1.80 millimeters thick)

Colors can be changed from the slicer during printing, and the model can be enlarged or reduced as desired. Usually, 2 mm thickness is more than sufficient. So if you enlarge it on the x and y axes, keep the “Uniform scale” function active, then to vary the thickness, uncheck “Uniform scale” and act only on the z-axis value, which you will set to the desired millimeters (I used 1.80 mm and it works perfectly)

It does not require an additional assembly process and can be hung with small nails or double-sided tape

A tip I always give is to first clean the print bed with dish soap and a sponge, rinsing with hot water, then drying it with compressed air, avoiding touching the surface with your hands. I also recommend performing the dynamic flow and flow rate calibrations provided in Bambu Studio. Personally, before printing, I dry the PLA with AMS 2 PRO for about 1 hour. These small measures, along with many others, determine the success of a good print

Before leaving negative reviews, please adjust these parameters. If you have difficulties or continue to encounter problems, do not hesitate to contact me; together we will find solutions in a perfect collaborative atmosphere. I have made several prints of this object and they all came out perfect as in the photos: if you have incorrect parameters, dirty or clogged nozzles, poorly calibrated machines, humid or poor quality filaments, do not blame me

PRINTING INSTRUCTIONS:

• Layer height 0.2 mm
• Initial layer height 0.2 mm
• Wall loops 2
• Top shell layers 5
• Bottom shell layers 3
• Infill 15%
• Infill pattern Grid
• No supports
• Outer wall speed 200 mm/s
• Inner wall speed 300 mm/s
• Normal print acceleration 10000 mm/s
• Outer wall acceleration 10000 mm/s