Filament Track Switch Holder (For H2 Series)
Print Profile(5)
Description
Boost Me (for free)
🧩 Model Overview
A stable diverter fixing bracket perfectly suited for Bambu Lab H series printers (H2D/H2C), specifically designed for the filament diverter, addressing pain points like module shaking and messy tubing after installation. It organizes messy routing into a single tube output, reserving a complete switching path for the AMS multi-color system
✅ Compatible Models: H2D / H2C
✅ Compatible Accessories: Official Bambu diverter
✅ Core Function: Stable positioning
🔧 Design Highlights
- Locking Structure
Precisely fits the printer's original rear profile, the top requires replacing with official BT3x10 screws, installation and removal completed within 10 minutes - Independent Tube Splitter Slot
Integrates a 2-in-2-out splitter slot, the PTFE tube from AMS → diverter → print head obtains physical constraint throughout its entire path, eliminating feeding failures caused by tube tangling - Lightweight Reinforced Ribs
⚙ Total filament < 40 g, strength sufficient to support the diverter component, no deformation after long-term use
🛠️ Installation Steps (Illustrated Guide Summary)
Completely power off the printer, remove the original rear protective cover (2 screws)
- Place the printed bracket firmly against the rear panel's groove, aligning the two through-holes
- Screw in the BT3x10 screw at the top, keep the original screw at the bottom
- Secure the diverter component in the desired position using the included BT2x8 screws
- Insert the PTFE tube, snap it into the guide slot, push the filament for a feeding test
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (7)