Tesla Juniper Performance momo wheels cup cover
Print Profile(1)
Description
In Europa non ci sono molti cerchi da 21" per la Tesla Juniper Performance 2025, ho installato i Momo RFX-01 in misura 9.5x21 e 10.5x21, finitura nero sabbiato, l'unico problema che ho riscontrato è nella coppetta copri mozzo, il diametro proprietario di Momo (64,1 mm) non mi ha permesso di trovare copri mozzi Tesla adatti, perciò ho disegnato e stampato questi che si accoppiano perfettamente al copri mozzo originale Momo, usando un biadesivo ad alto bond 3M per automotive acquistabile su Amazon, ho incollato le coperture ai copri mozzi in dotazione con i cerchi. Una volta stampato i pezzi con PLA-CF BambuLab li ho carteggiati su una superficie piana con carta vetrata grana 600, con un pò di pazienza sono diventati perfettamente planari e lisci, una volta puliti con alcol isopropilico li ho verniciati con due leggere passate di vernice satinata ad una distanza di circa 30 cm per ottenere un effetto simile alla sabbiatura. Il risultato mi soddisfa in pieno, e dopo 4000 km sono ancora al loro posto.
Consiglio il PLA-CF in quanto è totalmente inerte agli acidi e ai detergenti degli autolavaggi, altri materiali come ASA o ABS o PA tendono a macchiarsi pur essendo più resistenti.
___________________________________________________
In Europe there are not many 21" rims for the Tesla Juniper Performance 2025, I installed the Momo RFX-01 in size 9.5x21 and 10.5x21, black sandblasted finish, the only problem I encountered is in the hub cover cup, the inner hub diameter of Momo (64.1 mm) did not allow me to find suitable Tesla hub covers, so I designed and printed these that pair perfectly with the original Momo hub cover, using a 3M high bond double-sided adhesive for automotive purchaseable on Amazon, glued the covers to the hubcaps supplied with the rims.
Once the pieces were printed with PLA-CF (BambuLab), I sanded them on a flat surface with 600 grain sandpaper, with a little patience they became perfectly planar and smooth, once cleaned with isopropyl alcohol I painted them with two light strokes of satin paint at a distance of about 30 cm to obtain an effect similar to sandblasting. The result satisfies me completely, and after 4000 km they are still in their place.
I recommend the PLA-CF as it is totally inert to the acids and detergents of car washes, other materials such as ASA or ABS or PA tend to stain even though they are more resistant.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including, but not limited to, publishing derivative works outside the Makerworld platform or hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money or collect fees. Subject to the above restrictions, derivative works may be published only within the Makerworld platform, and all such derivative works must be licensed under the same SDFL‑C license, without modification or additional terms. You may download the digital versions of this object, 3D print it, and display images, videos, or usage demonstrations of 3D printed versions of the object on personal social media platforms or Makerworld official channels, provided that no digital versions of the object are shared or distributed.
Comment & Rating (0)