24-color portable watercolor palette | no supports Print in Place magnet/clasp dual version available

🌟 Introduction

This 24-color portable watercolor palette is designed for art students and outdoor sketch enthusiasts. It's no supports Print in Place, requiring no assembly or additional hardware, ready to use right after printing! It offers two opening options: "magnet version" and "pure clasp version" to suit different user habits; the widened clip slot design completely hides the binder clips when closed, perfectly fitting with sketchbooks, no bulging in your bag, allowing you to create anytime, anywhere～

📐 Dimensions

- Outer dimensions: 85 × 80 × 20 mm (compact and portable, easily fits into sketchbook side pockets/portable pencil cases)
- Paint cells: 24 independent paint slots (suitable for regular half-pans/homemade watercolor paints, single cell size fits universal specifications)
- Mixing area: Large capacity mixing palette (meets daily sketching and quick painting color mixing needs)
- Widened clip slot: Fits regular binder clips, completely hides the clips when closed, for tidier storage

✨ Design Highlights

1. no supports Print in Place: The box body, hinges, and clasp/magnet slots are all integrated, with no parts needing assembly. Simply slice and print, even beginners can succeed on the first try!
2. Dual opening options: - Magnet version: Reserved with 4 2×2mm magnet slots, magnetic closure is crisp and secure, opening and closing smoothly;
- Clasp version: Pure mechanical clasp design, no hardware required, zero-cost opening and closing, no worries about magnets falling off during outdoor sketching.
3. Hidden clip slot design: Widened clip slot, completely hides binder clips when closed, no more bulging clips taking up space, perfectly fits your sketchbook, making sketching storage super convenient!
4. Reasonable partitioning, sketching-friendly: 24 paint slots + large capacity mixing palette, paint storage and mixing in one go. Compact and space-saving, easily handles outdoor sketching and quick on-the-go painting.
5. Customizable exclusive identification: The lid has reserved custom pattern/text areas. You can use a keychain generator to customize your favorite pattern LOGO, add your initials, or exclusive logo to create a unique portable art tool!

🖨️ Printing Suggestions

- Printing material: PETG (PETG has better toughness and higher hinge durability; PLA not tested)
- Layer height: 0.2mm (balances detail and printing speed)
- Infill: 15%-20% (lightweight without affecting structural strength, while saving filament)
- Supports: no supports needed, just slice with default settings
- Print orientation: Place the box body flat, opening facing up, no special adjustments needed

💡 Small Tips

1. After printing the magnet version, simply press 4 2×2mm magnets directly into the reserved slots for use, no glue should be needed. Pay attention to distinguish magnet polarity to avoid reverse installation;
2. After printing the clasp version, it is recommended to let it cool completely before slowly opening and closing the hinges a few times to make the structure smoother. The clasp might be a bit tight at first, but it will improve significantly after a few openings;