Bamboo Forest Hueforge
Print Profile(1)
Description
I made this in two variants by swapping layers #7 and #13 green shades for different effects.
Both are included in the single file.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 2.21024mm
#000000 PLA BambuLab Basic Black Transmission Distance: 0.6
#00ae42 PLA BambuLab Basic BambuLab Green Transmission Distance: 2
#50533c PLA+2.0 Sunlu Olive Green Transmission Distance: 0.1
#e7ceb5 PLA BambuLab Basic Beige Transmission Distance: 8
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #7 (0.64mm) swap to BambuLab Green
At layer #13 (1.12mm) swap to Olive Green
At layer #19 (1.6mm) swap to Beige for the rest.
Boost Me (for free)
If you enjoy this bamboo grove Hueforge, a Boost helps support more layered art prints like this. Thanks for checking it out!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)