Creeper Head Snap-On Hat
Print Profile(1)
Description
A fun snap-on Creeper head accessory designed to attach to any hat with a top button. This project was inspired by my child, who wanted something unique for Hat Day at school but wasn’t interested in wearing my previous miniature cheesehead design. When I asked what he had in mind, his answer was immediate … clearly, we go through a lot of green and black in this house.
During the printing process, I encountered challenges using AMS with the Creeper face oriented downward, as the threads did not print cleanly enough for the adapter to function properly. To resolve this, I redesigned the model so the face is printed as a separate component, which can then be securely glued into place.
I found that the snaps can flex with PLA pretty easily .3mm so I made multiple steps up and down at .3mm intervals. My largest hat snap measured 16.7mm and the 16.7mm adapter works but feels a bit loose for jumping up and down or moving around. I put the 16.4mm snap on that hat and it went on with no problem and was still easily removable but held tight while wearing.
Check out my other Snap-on Hat that uses the same adapter for sizing
https://makerworld.com/en/models/1658281-snap-on-cheesehead#profileId-1753955
License
You may create derivative works based on this object, provided that all such derivative works are published exclusively on the MakerWorld platform and include proper attribution to the original creator. You may not share, upload, host, distribute, or publish this object—or any derivative work of this object—on any other digital platform, marketplace, or distribution channel. Commercial use of this object and any derivative works is strictly prohibited. This includes, but is not limited to, selling, renting, sublicensing, or using the object in any context in which you receive monetary compensation or other financial benefits.
Comment & Rating (0)