SKADIS Tray, fully Parametric
Print Profile(1)
Description
Fully parametric tray for the IKEA SKADIS wall with a very stable mount. The box / tray can be made in PLA.
However, the mount should be printed in PETG and must be downloaded separately from my print profile!
This mount is held against the SKADIS wall, the pins are inserted and locked. Additional limiting nubs effectively prevent vertical slipping on the plate. The tray / box can now be slid onto the mounting plate from above.
Parameters of the box / tray (To customize, please click the “Customize” button):
width / Width
The width of the box itself is continuously adjustable, but due to the SKADIS grid of 40mm, the back wall “jumps” in 40mm increments
- depth / Depth
- rear_wall_radius / Radius of the back wall
- wall_thickness / Wall thickness
height / Height
The height of the box itself is continuously adjustable, but due to the SKADIS grid of 40mm, the back wall “jumps” in 40mm increments
- front_radius / Radius of the front (top view)
- no_cells_width / Number of cells in width (1 = no division)
- no_cells_depth / Number of cells in depth (1 = no division)
- front_tray / Generates a forward-mounted holder for e.g. tweezers
- front_tray_depth / Depth of the forward-mounted holder
- front_tray_width_percent / Width of the forward-mounted holder in percent, relative to the width of the tray (width)
Boost Me (for free)
Do you like this model?
A boost makes me happy!
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (0)