A 60CM long and 40CM wide school playground sand table model with a plastic track can be used for scene display and topic presentation

Recently, I helped students create a sand table model for their graduation project. This sand table model with a plastic track can be used to create a model scene base for displaying a school playground. The model playground measures 60CM long and 40CM wide, and it consists of 6 interlocking plates. A multi-color design was directly used, requiring only three colors with few color changes. Each plate takes 3 hours to print, and each plate can be fixed by plugging into the interface. It is recommended to apply two drops of super glue during assembly for a more secure finished product. The design includes 3 green belt plates, each 20X10 in size, which can be connected to the front of the playground scene. You can make some plant models yourself to place on them. If not needed, you can just print the playground models from plate 1 to 6. This model is printed using PLA Basic material, using white (for track lines and baseplate body), green (for the grass in the playground), and brick red (for the plastic track color). The model is an original design, and its creation was not easy. If you like it, please don't waste your boost coupon and boost me.

Note: This model does not include the miniature figures in the scene.