Akatzuki Pin
Print Profile(1)
Bill of Materials
Description
For NARUTO fans! here is an iconic pin that needs no introduction, useful to print and give as a gift attached to a Naruto manga for a friend*, or to attach to your Konan cosplay! (if you do Konan cosplay, flex your photo below in the comments, it's an ORDER)
The modifications made to the speed and the first layer's extruder are created in such a way as to make the grooves between two plastic lines less visible. You can modify these parameters as you wish to improve the first layer (the most important for this type of object).
The central hole is for gluing the pin that will hold the badge. I made it 4.8 mm, it's a bit tight to increase the hold, and you need to insert the pin by pushing it with small pliers. If you don't like the method, just increase the size to 4.9 and it will fit without problems. I used normal super glue or similar to fix it to the hole.
Boost Me (for free)
If you like my creations, leave a boost. It costs you nothing, and with your boost, I can create more free objects to print <3.
No, friends, please, I only have 3 days to receive a Boost, otherwise, they'll cut off my power!
You can find the DIY pins I used on AliExpress. I'll send you two photos just so you understand:
Make sure to get these, or if you choose others, modify the hole for the size of your pin base.
Thank you very much from Roa.
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
Comment & Rating (1)