Ubiquiti Wall Mount for Access Points - UniFi AP

This is a wall mount for the Ubiquiti Access Point universal mounting plate which comes with the majority of their newer access points including the U6 Pro, U6 Enterprise, U7 Pro, U7 Pro, U7 Pro XG, and more.  It securely holds the access point horizontally for placing on any wall and uses four small bolts/nuts to hold the universal plate to the stand.  In my example I'm using 12mm M4 bolts but multiple sizes should fit including the bolts that come with the mounting plate.  You could even use some metal or wood screws and screw directly into the plastic of the mount.  There are then 4 standard drywall screw holes although only two are needed to secure it to a wall.

Ubiquiti access points tent to run hot so I suggest PETG at a minimum.  Personally mine in the photos is printed in Polymaker white ASA.  Model prints with no supports.  I have the profile set to a 0.20 standard preset as looks don't matter much but it of course can be printed at a lower layer height if you want.