BENJAMIN KENOBI

cover

IMG_2143.jpeg

IMG_2141.jpeg

IMG_2133.jpeg

IMG_2156.jpeg

IMG_2145.jpeg

IMG_2138.jpeg

IMG_2151.jpeg

IMG_2134.jpeg

IMG_2146.jpeg

IMG_1977.jpeg

IMG_1976.jpeg

IMG_1978.jpeg

IMG_1986.jpeg

IMG_1981.jpeg

IMG_1973.jpeg

Canopy

plate_1.png

Cockpit

plate_2.png

Front

plate_3.png

Mid-section

plate_4.png

Missile Pods

plate_5.png

Tail B

plate_6.png

plate_7.png

Two-Tone Landing Gear

plate_8.png

Black Bits

plate_9.png

Landing Gear Pins

plate_10.png

Silver - Landing Gear Struts

plate_11.png

plate_12.png

Missiles

plate_13.png

plate_14.png

plate_15.png

Complete Rear Air Intake

plate_16.png

plate_17.png

plate_18.png

97b55cef41f9c371.jpeg

IMG_1979.jpeg

IMG_1985.jpeg

Update V1.6&nbsp;Use a vice/clamp to push the pins into landing gear. Install the pistons for the landing gear in the main body before putting main body together.  I used paperclips for the missile pods. The landing struts need a bit of sanding/shaping to get them working properly. Keep a lot of friction in the landing gear and missile pods as this holds them in place.&nbsp;Total model length is 53cm.

0.16mm 50mm/s outer walls/Top surfaces, 2 walls, 15% infill

martin.taichl

UD4 - Dropship from Aliens

This is an 80% remix of Martin&#39;s most excellent model. Missiles are AMS but everything else is single colour filament.&nbsp;I used paper clips for the missile pod joints, and a little vice to push the pins into the landing gear.

UD-4 Dropship from Aliens (80% Remix)

ASIA

Print Profile(1)

Bill of Materials

Description

Comment & Rating (3)

This remix is based on

License

Related Models